MAXI UPS12KDG- 1.2KVA LED VERSION

Description

1.2 KVA (Kilovolt-Amperes): This means the UPS can handle up to 1,200 Volt-Amps. The real power (in watts) it can provide is approximately 960 watts (assuming a power factor of 0.8). This would be suitable for smaller devices or office equipment, such as:

Desktop computers

Network devices (routers, switches, modems)

Small servers and workstations

Point-of-sale (POS) systems

2. LED Display

LED Display: The LED screen is used to provide real-time status updates on the UPS operation. Common parameters shown include:

Battery charge level: The current status of the UPS battery (full, low, or charging).

Load percentage: Indicates the load being drawn from the UPS relative to its total capacity.

Input and output voltage: Monitors the voltage being fed into the UPS and the regulated output voltage.

Fault alerts: Displays error or warning codes, such as overloads, battery failure, or low battery.

3. Battery Type and Backup Time

Battery Type: The MAXI UPS12KDG-1.2KVA  uses sealed lead-acid (SLA) batteries, which are standard in most UPS systems, though some higher-end models may use lithium-ion batteries for better efficiency and longer lifespan.

Backup Time: The duration of backup  depends on the connected load. Here are typical estimates:

At full load (1,200 VA): About 5-10 minutes.

At half load (600 VA): Likely 10-20 minutes.

At lighter loads: The backup could extend to 30 minutes or more, depending on the load and battery capacity.

4. Surge Protection and Voltage Regulation

Surge Protection: Provides protection from voltage spikes or surges that could damage sensitive equipment. It is essential for safeguarding electronics from events like lightning strikes, power grid fluctuations, or other surges.

Automatic Voltage Regulation (AVR): Ensures that the UPS maintains a stable output voltage even if the input voltage fluctuates. This feature is useful for protecting devices from brownouts (low voltage) or over voltages.

5. Input and Output Specifications

Input Voltage: Typically designed for 220V-240V AC input, making it suitable for regions with this voltage standard.

Output Voltage: Likely to output 220V AC (or 110V AC, depending on the region), with regulated voltage to ensure connected equipment receives clean and stable power.

6. Safety and Protection Features

Overload Protection: Automatically shuts down the UPS if the connected load exceeds its rated capacity to prevent damage to the unit.

Short-circuit Protection: Protects against faults that could damage the UPS or the connected equipment.

Battery Overcharge Protection: Prevents the battery from being overcharged, which could lead to reduced battery lifespan or failure.

Over-temperature Protection: Shuts the UPS down if it overheats, ensuring that internal components do not get damaged.

7. Applications

Home Office: Protects desktop computers, routers, and home networking equipment from power interruptions.

Small Businesses: Suitable for protecting small office devices, workstations, and light network equipment.

POS Systems: Ensures that point-of-sale systems remain operational during power failures, reducing the risk of transaction loss.

Telecommunication Equipment: Can be used for routers, modems, and other communication devices to maintain continuous operation during power outages.

8. Additional Features

USB/Serial Ports: Some models may offer communication ports to allow monitoring through software or automated shutdown of connected devices in the event of a power failure.

Network Management (Optional): Some UPS systems allow for network management via SNMP or web interfaces for remote monitoring.

Power Capacity: 1.2 KVA / 960 W

Battery: Likely sealed lead-acid (SLA), providing backup during power outages.

LED Display: Shows battery status, load percentage, input/output voltage, and fault conditions.

Backup Time: 5-10 minutes at full load; longer at lighter loads.

Input Voltage: 220V-240V AC (standard for many regions).

Output Voltage: 220V AC (or 110V AC depending on region).

Surge Protection: Yes, protects from voltage surges.

Automatic Voltage Regulation (AVR): Stabilizes output voltage during fluctuations.

Dimensions: Approx. 200-300 mm (H) x 150-220 mm (W) x 300-400 mm (D).

Weight: Around 8-15 kg (17-33 lbs).

This model provides basic power protection for small electronics, making it ideal for home offices, small businesses, and critical equipment like POS systems or communication devices.

Additional information

Weight	33 kg
Dimensions	30 × 22 × 40 cm