MAXI FLOOR STANDING INSTALLATION KIT AC 8HP

Description

1. Indoor Unit (Floor Standing AC Unit):

   • The indoor unit houses the evaporator coil, fan, and air filter. It is installed on the floor and is typically larger to handle the airflow needed for an 8HP capacity.
   • Dimensions (approx.):
     • Height: 1600 mm to 1900 mm (63 inches to 75 inches)
     • Width: 500 mm to 800 mm (20 inches to 31 inches)
     • Depth: 350 mm to 500 mm (14 inches to 20 inches)
     • Weight: 40 kg to 70 kg (88 lbs to 154 l

2. Refrigerant Copper Pipes:

   • The refrigerant lines are typically copper and are used to connect the indoor and outdoor units.
   • Pipe Size: Typically 1/2 inch for the liquid line and 5/8 inch or 3/4 inch for the suction line.
   • Length: The pipes will need to be long enough to span the distance between the two units (usually a few meters).

3. Condensate Drain Pipe:

   • The indoor unit produces condensate, which must be drained. A PVC drain pipe or flexible hose is included in the installation kit.
   • Length: Typically 1-3 meters depending on installation height.

4. Electrical Power Cable:

   • A heavy-duty electrical cable is included to connect the indoor unit, outdoor unit, and power supply.
   • Circuit Breaker: An appropriate circuit breaker for the 8HP system is necessary for safety.

5. Control Wiring:

   • Wires for controlling the AC system remotely via a wall-mounted thermostat or wired controller.

6. Mounting Brackets:

   • Mounting brackets are included to secure the outdoor condenser unit either on the ground or on the wall (depending on the setup).

7. Vibration Isolation Pads:

   • Pads are included to reduce noise and vibration from the outdoor unit.

8. Insulation for Refrigerant Lines:

   • Insulation is provided to cover the refrigerant pipes to prevent energy loss and avoid condensation on the pipes.
     1. Indoor Unit Setup: Position and secure the indoor unit in the desired location, ensuring airflow is not obstructed. Use the mounting brackets and check the level.
     2. Outdoor Unit Setup: Install the outdoor condenser unit, either on the ground or on a wall mount, ensuring adequate space for airflow and ventilation.
     3. Refrigerant Lines: Run the copper refrigerant pipes between the indoor and outdoor units, ensuring that the pipes are insulated to prevent energy loss and condensation.
     4. Electrical Connections: Connect the electrical cables, ensuring proper grounding, and install the necessary circuit breakers for safety.
     5. Drainage Setup: Connect the condensate drain pipe from the indoor unit to ensure that condensation can be drained away efficiently.
        • Offices: Ideal for cooling large office spaces, conference rooms, and open-plan areas.
        • Commercial Buildings: Can be used in stores, shopping malls, or showrooms where large areas need to be cooled.
        • Industrial Spaces: Suitable for cooling warehouses or production areas that require significant cooling capacity.
        • Large Homes: Can be used in residential settings, especially large homes or villas that require high cooling capacity.Testing and Commissioning: Test the system for proper cooling performance, check for refrigerant leaks, and ensure the system runs smoothly.
          

          Typical Applications for an 8HP Floor Standing AC:

   • The MAXI Floor Standing AC 8HP Installation Kit includes all the necessary components to install and operate the 8HP AC system effectively. The system is ideal for commercial or industrial applications where high cooling capacity is required. Ensure that the installation is done by a qualified HVAC technician for safety and optimal performance.

Additional information